Lux Products Corporation

Wiring Information and Trouble Shooting

This page provides general guidance for your Lux Line voltage mechanical thermostat. For more detailed information please refer to the instructions that came with your thermostat.
Those instructions can be viewed in PDF format here.

Please make specific note regarding LOW VOLTAGE and LINE VOLTAGE directions. Do not install LINE VOLTAGE wires to a LOW VOLTAGE control.

Do NOT wire by color of the wire, wire by the LETTER designation to which the wire was attached on the previous control.

If there were no letter designations on your old thermostat, contact our Technical Assistance Department for assistance.

< back to main support page

	WIRING INFORMATION
Model	LV2
Description
120, or 240 VAC connected to previous control.	DO NOT ATTACH LINE VOLTAGE WIRES TO A LOW VOLTAGE THERMOSTAT. Although its installation is relatively simple, this thermostat is designed to switch hazardous voltage. If you are unsure of any aspect of this products application or installation consult with our technical assistance personnel, or other qualified service personnel for assistance. Carefully follow the wiring instructions for the LV2 heating control.