Home Support FAQ's Contact About LUX Press Room
Press Release 
Lux Thermostats Blog
Blog
Facebook
Facebook
Twitter
Twitter
 
<< back to support page
ยป Support LV3

Wiring Information and Troubleshooting
  • This page provides general guidance for your LUX Line-Voltage mechanical thermostat. For more detailed information please refer to the instructions that came with your thermostat.
  • Please make specific note regarding LOW VOLTAGE and LINE VOLTAGE directions. Do not install LINE VOLTAGE wires to a LOW VOLTAGE control.
  • Do NOT wire by color of the wire, wire by the LETTER designation to which the wire was attached on the previous control.
  • If there were no letter designations on your old thermostat, contact our Technical Assistance Department for assistance.
  • The instruction manual for this model can be viewed in PDF format by clicking here.

Model LV3
   
Problem Resolution
120 VAC or 240 VAC connected to previous control DO NOT ATTACH LINE VOLTAGE WIRES TO A LOW VOLTAGE THERMOSTAT.
Although its installation is relatively simple, this thermostat is designed to switch hazardous voltage. If you are unsure of any aspect of this products application or installation consult with our technical assistance personnel, or other qualified service personnel for assistance.
For further assistance: Contact your HVAC service company or our Technical Assistance Line if not resolved.
 
Top