How do I program the schedule on my thermostat?

There are four periods per each of the 7 days of the week, for both Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four periods below, must be performed independently in both Heat and Cool modes.

NOTE-1: This model has a user option to use only TWO periods instead of the default of FOUR.  In the 2-period configuration, all of the following steps are the same except there will be only DAY and NITE periods present.  NOTE-2: This model has a user option to be either programmable or non-programmable (manual).  If the clock or period times are not shown, check for this setting.

**FIRST: Select HEAT or COOL Mode as appropriate.

TO SET THE HEAT TEMPERATURE PROGRAM

While in HEAT mode, press MENU, then the SCROLL button one time, and “SET / REVIEW HEAT PROGRAMS” should be displayed at the top of the screen.  Press OK.  This will program all 7 days of the week, each day separately, in order of Mo, Tu, We, Th, Fr, Sa, Su).

MONDAY “MORN” Period

• Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for MORN.
• Press NEXT to proceed (note: Next button will not save changes)
• Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for MORN.
• Press NEXT to continue

MONDAY “DAY” Period

• Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for DAY.
• Press NEXT to proceed
• Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for DAY.
• Press NEXT to continue

MONDAY “EVE” Period

• Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for EVE.
• Press NEXT to proceed
• Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for EVE.
• Press NEXT to continue

MONDAY “NITE” Period

• Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for NITE.
• Press NEXT to proceed
• Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for NITE.
• Press NEXT to continue

Thermostat will now be on TUESDAY, MORN Period.  Continue using the same NEXT, NEXT process shown above for each of the remaining Weekdays if there are any time or temperature differences between individual days of the week.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.

COPY HEAT VALUES TO REMAINING DAYS OF THE WEEK

If the Heating values entered for MONDAY are to be used for all the remaining days of the week, complete all of Monday and press NEXT until you move into TUESDAY.  Once into Tuesday, press the COPY button one time.  The screen will show COPY PROGRAM, and then allow you to choose the day you would like to Copy “FROM”, flashing.  Choose the Copy From day using the UP/DOWN buttons, than press NEXT one time to proceed.  You will now choose the Copy “TO” day, which his flashing, using the UP/DOWN buttons.

Once you have selected the destination day, press the COPY button and the flashing destination day will automatically advance to Wednesday.  Keep pressing COPY until the remainder of all the days of the entire week are complete and the display comes back around to TUESDAY flashing again.  All seven days of the week will now have the same program periods for Heat mode.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.

TO SET THE COOL TEMPERATURE PROGRAM

While in COOL mode, press MENU, then the SCROLL button one time, and “SET / REVIEW COOL PROGMS” should be displayed at the top of the screen.  Press OK.  This will program all 7 days of the week, each day separately, in order of Mo, Tu, We, Th, Fr, Sa, Su).

Repeat all of the same steps shown above in Heat Mode Programming, for the Monday “MORN, DAY, EVE, and NITE” periods.  Press NEXT after each step.

Thermostat will now be on TUESDAY, MORN Period.  Continue using the same NEXT, NEXT, NEXT process shown above for each of the remaining days of the week if there are any time or temperature differences between individual days of the week.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.

COPY COOL VALUES TO REMAINING DAYS OF THE WEEK

If the Cooling values entered for MONDAY are to be used for all the remaining days of the week, complete all of Monday and press NEXT until you move into TUESDAY.  Once into Tuesday, press the COPY button one time.  The screen will show COPY PROGRAM, and then allow you to choose the day you would like to Copy “FROM”, flashing.  Choose the Copy From day using the UP/DOWN buttons, than press NEXT one time to proceed.  You will now choose the Copy “TO” day, which his flashing, using the UP/DOWN buttons.

Once you have selected the destination day, press the COPY button and the flashing destination day will automatically advance to Wednesday.  Keep pressing COPY until the remainder of all the days of the entire week are complete and the display comes back around to TUESDAY flashing again.  All seven days of the week will now have the same program periods for Cool mode.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.

-Below is a brief instructional video on this process