To change the temperature displayed to read Celsius instead of Fahrenheit, (or Fahrenheit to Celsius):
The default value is Fahrenheit – OFF/DOWN. All temperature values are displayed using the Fahrenheit scale. For Celsius, the position needed is ON/UP = C. This setting displays all temperature values using the Celsius scale.
4. Now look on the circuit board for a black block with small white switches. Use a pen or pencil to move the jumper the opposite position.
5. Now press the small black button on the circuit board labeled “Hardware Reset” (Do not hit Software reset, this will return your program to factory defaults).
6. Finally, put the front half of the thermostat back onto the wall.