Cinque Terre
Smart Thermostats
Cinque Terre
Programmable Thermostats
Cinque Terre
Non-Programmable Thermostats
7 Jan / 19
No Comments    

How do I set a hold?

dcahill    Programmable Thermostat TX9600TS
A Temperature HOLD is used for maintaining a fixed set temperature indefinitely.   It bypasses the program and will stay at the same temperature forever. To enter Hold mode, the thermostat  must be in Cool or Heat Position.         1.Press “HOLD” in the lower left hand corner...
READ MORE
7 Jan / 19
No Comments    

What is the air filter reminder, why is it flashing?

dcahill    Programmable Thermostat TX9600TS
When you see the word “Filter” flashing in the display of the thermostat, it is simply a reminder to change the filter in the blower of your heating\cooling system (totally separate from thermostat).   Please refer to the manufacturer of your heating\cooling system to find out how to change this...
READ MORE
7 Jan / 19
No Comments    

How do I switch between Fahrenheit and Celsius?

dcahill    Programmable Thermostat TX9600TS
If you wish to change the temperature displayed to read Celsius instead of Fahrenheit, (or Fahrenheit to Celsius): Take the front cover off the stat off the wall.  Look on the circuit board to find the dip switch table which tells you what the dip switches are for. The dip...
READ MORE
7 Jan / 19
No Comments    

How do I set day and time on my thermostat?

dcahill    Programmable Thermostat TX9600TS
To change the day: Touch the displayed Day on the screen. Advance with the UP arrow to the correct day Touch displayed Day again to return to main screen. To change the time: Touch the displayed Time on the screen. Advance with the UP or Down keys to set the...
READ MORE
7 Jan / 19
No Comments    

How do I adjust calibration on my thermostat?

dcahill    Programmable Thermostat TX9600TS
If you wish to adjust the displayed temperature up or down, there is calibration feature in your thermostat.  Our thermostats are pre-calibrated at the factory using a calibration setting of “0” and should not need to be changed,  However, you can change the calibration if you wish to adjust it...
READ MORE
7 Jan / 19
No Comments    

How do I switch between 12 hr and 24 hr time on my thermostat?

dcahill    Programmable Thermostat TX9600TS
The following steps will allow you to switch between Standard and Military time: Take the front cover off the thermostat off the wall.  Look on the circuit board to find the dip switch table which tells you what the dip switches are for.  Look at row labeled “Time” for 24...
READ MORE
7 Jan / 19
No Comments    

How do I set day and time on my thermostat?

dcahill    ELV4 Programmable Thermostat PSP511 PSP511LC TX1500E TX500E TX9100E WIN100
If you wish to change the day and or time, perform the following steps: open the front door of the thermostat. Turn the rotary dial to “Set Day/Time”. You will see the day blinking at the top.  Press the “Up” button until it shows the correct day. Press “Next” You...
READ MORE
7 Jan / 19
No Comments    

What does a thermostat do?

dcahill    FAQ
A thermostat, in the most simple terms, turns on the furnace or air conditioning system until the room temperature reaches the set temperature. Then, the thermostat turns the system off....
READ MORE
2 Jan / 19
No Comments    

What does a thermostat do?

Cody Howard    FAQ
A thermostat, in the most simple terms, turns on the furnace or air conditioning system until the room temperature reaches the set temperature. Then, the thermostat turns the system off....
READ MORE