Cinque Terre
Smart Thermostats
Cinque Terre
Programmable Thermostats
Cinque Terre
Non-Programmable Thermostats
9 Jan / 19
No Comments    

What is the air filter reminder, why is it flashing?

dcahill    Programmable Thermostat PSP511 PSP511LC TX1500E TX500E TX9100E
When you see the word “Filter” flashing in the display of the thermostat, it is simply a reminder to change the filter in the blower of your heating\cooling system (totally separate from thermostat).   Please refer to the manufacturer of your heating\cooling system to find out how to change this...
READ MORE
9 Jan / 19
No Comments    

How do I switch between Fahrenheit and Celsius on my thermostat?

dcahill    Programmable Thermostat PSP511 PSP511LC TX1500E TX500E TX9100E
If you wish to change the temperature displayed to read Celsius instead of Fahrenheit, (or Fahrenheit to Celsius):   Take the front cover off the stat off the wall. Look on the circuit board to find the dip switch table which tells you what the dip switches are for. Look...
READ MORE
9 Jan / 19
No Comments    

How do I adjust calibration on my thermostat?

dcahill    Programmable Thermostat PSP511 PSP511LC TX1500E TX500E
If you wish to adjust the displayed temperature up or down, there is calibration feature in your thermostat.  Although it is factory calibrated and should not need to be changed, you can adjust it to match a different thermometer in home. To adjust your calibration, perform the following steps: Dial...
READ MORE
9 Jan / 19
No Comments    

How do I switch between 12 hr and 24 hr time on my thermostat?

dcahill    Programmable Thermostat PSP511 PSP511LC TX1500E TX500E TX9100E
The following steps will allow you to switch between Standard and Military time: If you wish to change the Time Format (24 vs. 12), take the front cover of the stat off the wall.  Look on the circuit board to find the dip switch table Look for the row that...
READ MORE
9 Jan / 19
No Comments    

How do I set day and time on my thermostat?

dcahill    Programmable Thermostat TX9000TS
To change the day: ​ Touch the displayed Day on the screen. Advance with the UP arrow to the correct day Touch displayed Day again to return to main screen. ​ To change the time: ​ Touch the displayed Time on the screen. Advance with the UP or Down keys...
READ MORE
9 Jan / 19
No Comments    

How do I set a hold?

dcahill    Programmable Thermostat TX9000TS
A Temperature HOLD is used for maintaining a fixed set temperature indefinitely.   It bypasses the program and will stay at the same temperature forever. To enter Hold mode, the thermostat  must be in Cool or Heat Position.         1.Press “HOLD” in the lower left hand corner...
READ MORE
9 Jan / 19
No Comments    

What is swing, and how do I set it?

dcahill    Programmable Thermostat TX9000TS
A thermostat works by turning your heating or cooling system on and off whenever the room temperature varies a certain number of degrees from the set-point.  This variation is the “swing”. Your system should cycle on about 3 to 6 times per hour. A smaller swing setting increases the number...
READ MORE
9 Jan / 19
No Comments    

How do I reset my thermostat?

dcahill    Programmable Thermostat TX9000TS
If your thermostat is behaving erratically or something strange is in the display, hitting the “Reset” buttons can often correct the problem. Hardware Reset: Try this first since it does not erase anything.  Take the front of the thermostat off the wall and look for a small white round reset...
READ MORE
9 Jan / 19
No Comments    

How do I program the schedule on my thermostat?

dcahill    Programmable Thermostat TX9000TS
There are four periods per each of the 7 days of the week, for both Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same...
READ MORE
9 Jan / 19
No Comments    

How do I lock and unlock my thermostat?

dcahill    Programmable Thermostat TX9000TS
There is a keyboard lock feature on your TX9000TS thermostat is used to prevent tampering with the settings.  If it is active, you will see a little picture of a locked padlock on the display. If you forget the code and need to unlock it: Take the front half of...
READ MORE
9 Jan / 19
No Comments    

What is the air filter reminder, why is it flashing?

dcahill    Programmable Thermostat TX9000TS
When you see the word “Filter” flashing in the display of the thermostat, it is simply a reminder to change the filter in the blower of your heating\cooling system (totally separate from thermostat).   Please refer to the manufacturer of your heating\cooling system to find out how to change this...
READ MORE
9 Jan / 19
No Comments    

How do I switch between Fahrenheit and Celsius?

dcahill    Programmable Thermostat TX9000TS
To change the temperature displayed to read Celsius vs. Fahrenheit: Look on the circuit board to find the dip switch table in the lower right hand corner. Look for the column that has F in one block and C in the other.  Look down and note the dip switch number...
READ MORE