Cinque Terre
Smart Thermostats
Cinque Terre
Programmable Thermostats
Cinque Terre
Non-Programmable Thermostats
9 Jan / 19
No Comments    

How do I adjust calibration on my thermostat?

dcahill    Programmable Thermostat TX9000TS
If you wish to adjust the displayed temperature up or down, there is calibration feature in your thermostat.  Our thermostats are pre-calibrated at the factory using a calibration setting of “0” and should not need to be changed,  However, you can change the calibration if you wish to adjust it...
READ MORE
9 Jan / 19
No Comments    

How do I switch between 12 hr and 24 hr time on my thermostat?

dcahill    Programmable Thermostat TX9000TS
The following steps will allow you to switch between Standard and Military time: Take the front cover of the stat off the wall.  Look on the circuit board to find the dip switch table in the lower right hand corner. Look for the column that has 24 Hr in one...
READ MORE
9 Jan / 19
No Comments    

How do I lock and unlock my thermostat?

dcahill    Programmable Thermostat TX9100U TX9100Uc
To prevent tampering with your settings, the front panel buttons can be locked out, requiring a four digit code to unlock them. You may use either the default lock code of “0000”, or your own code number (see “To Lock the Keypad”). NOTE: These keypad lock instructions need to be...
READ MORE
9 Jan / 19
No Comments    

What is “Setback” and how do I use it?

dcahill    Programmable Thermostat TX9100U TX9100Uc
The setback button can be used to save energy when you plan to leave your house for some period of time.  It is similar to the HOLD feature and TEMPORARY OVERRIDE by holding a fixed temperature, but it also provides you the ability to maintain this fixed temperature anywhere between...
READ MORE
9 Jan / 19
No Comments    

How do I program the schedule on my thermostat?

dcahill    Programmable Thermostat TX9100U TX9100Uc
There are four periods per each day, for Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  These same programming steps for all four periods below, must be performed independently in both Heat and Cool modes....
READ MORE
9 Jan / 19
No Comments    

How do I program the schedule on my thermostat?

dcahill    Programmable Thermostat TX1500U TX1500Uc
There are four periods per each grouping of days, for Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four...
READ MORE
9 Jan / 19
No Comments    

How do I program the schedule on my thermostat?

dcahill    Programmable Thermostat TX700U TX700Uc
There are four periods per each grouping of days, for Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four...
READ MORE
9 Jan / 19
No Comments    

Can I disable a programmed schedule on my thermostat?

dcahill    Programmable Thermostat TX1500U TX500U TX700U TX9100U
This feature allows the thermostat to be placed in either programmable or manual operating mode.  In programmable mode, the thermostat controls the room temperature automatically according to your pre-set program that follows your daily routine. In manual mode, the thermostat operates manually just like a mechanical or non-programmable model.  This method...
READ MORE
9 Jan / 19
No Comments    

Can I switch between 2 and 4 period programming?

dcahill    Programmable Thermostat TX1500U TX500U TX700U TX9100U
The thermostat comes from the factory set at 4 periods per day.  This allows you to program 4 different start times with 4 different temperatures throughout the day.  If you are home all day and only need 2 changes per day, you can simplify the programming steps by changing the...
READ MORE
9 Jan / 19
No Comments    

How do I reset my thermostat?

dcahill    Programmable Thermostat TX1500U TX500U TX700U TX9100U
If your thermostat is behaving erratically or something strange is in the display, hitting “Reset” buttons can often correct the problem. Hardware Reset: Try this first since it does not erase anything.  Take the front of the thermostat off the wall and look for a small black round reset buttons...
READ MORE
9 Jan / 19
No Comments    

How do I switch between Fahrenheit and Celsius on my thermostat?

dcahill    Programmable Thermostat TX1500U TX500U TX700U TX9100U
To change the temperature displayed to read Celsius instead of Fahrenheit, (or Fahrenheit to Celsius): Take the front cover off the stat off the wall.  Look on the circuit board to find the dip switch table which tells you what the dip switches are for. Look for the Row which...
READ MORE
9 Jan / 19
No Comments    

How do I switch between 12 hr and 24 hr time on my thermostat?

dcahill    Programmable Thermostat TX1500U TX500U TX700U TX9100U
The following steps will allow you to switch between Standard and Military time: Remove the front cover of the thermostat from the wall.  On the circuit board, locate the row of dip switches.  It is a horizontal rectangular black box with white switches.   Move Switch #5 to the opposite...
READ MORE