Cinque Terre
Smart Thermostats
Cinque Terre
Programmable Thermostats
Cinque Terre
Non-Programmable Thermostats
9 Jan / 19
No Comments    

How do I adjust the temperature differential for 2nd stage heating?

dcahill    Programmable Thermostat TX1500U TX1500Uc TX500U TX500Uc TX700U TX700Uc TX9100U TX9100Uc
The OFFSET setting is shown as number of degrees (default = 4F). It is similar in nature to the Swing setting, however,  it only effects the operation of the second (auxiliary) heating stage of your system.   ​ The auxiliary heat is there for when your system can’t keep up...
READ MORE
9 Jan / 19
No Comments    

How do I program the schedule on my thermostat?

dcahill    Programmable Thermostat TX500U TX500Uc
There are four periods per each grouping of days, for Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four...
READ MORE
9 Jan / 19
No Comments    

How do I adjust calibration on my thermostat?

dcahill    Programmable Thermostat TX1500U TX1500Uc TX500U TX500Uc TX700U TX700Uc TX9100U TX9100Uc
If you wish to adjust the displayed temperature up or down, there is calibration feature in your thermostat.  Although it is factory calibrated and should not need to be changed, you can adjust it to match a different thermometer in home. To adjust your calibration, perform the following steps: Ensure...
READ MORE
9 Jan / 19
No Comments    

How do I set day & time on my thermostat?

dcahill    Programmable Thermostat TX1500U TX1500Uc TX500U TX500Uc TX700U TX700Uc TX9100U TX9100Uc
If you wish to change the day and or time, perform the following steps: ​ ​ open the front door of the thermostat. Slide the SET slide switch in the upper right corner to “Day/Time”. You will see the day blinking at the top.  Press the “Up” button until it...
READ MORE
9 Jan / 19
No Comments    

What is swing, and how do I set it?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
Note: Maximum time between button presses is 10 seconds A thermostat  works by turning your heating or cooling system on and off whenever the room temperature varies from the desired set-point  temperature.   The amount of this variation is called the swing. Generally your system should cycle on about 3...
READ MORE
9 Jan / 19
No Comments    

How do I reset my thermostat?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
If your thermostat is behaving erratically or something strange is in the display, hitting “Reset” buttons can often correct the problem. Hardware Reset: Try this first since it does not erase anything.  Take the front of the thermostat off the wall and look for a small round black reset buttons...
READ MORE
9 Jan / 19
No Comments    

Can I disable a programmed schedule on my thermostat?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
This feature allows the thermostat to be placed in either Programmable or Manual operating mode.  In programmable mode, the thermostat controls the room temperature automatically according to your pre-set program that follows your daily routine. In manual mode, the thermostat operates manually just like a mechanical or non-programmable model.  This method...
READ MORE
9 Jan / 19
No Comments    

Can I switch between 2 and 4 period programming?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
The thermostat comes from the factory set at 4 periods per day.  This allows you to program 4 different start times with 4 different temperatures throughout the day.  If you are home all day and only need 2 changes per day, you can simplify the programming steps by changing the...
READ MORE
9 Jan / 19
No Comments    

How do I set a hold?

dcahill    Programmable Thermostat TX1500U TX1500Uc TX500U TX500Uc TX700U TX700Uc TX9100U TX9100Uc
Use the HOLD feature on the thermostat to allow manual control with a fixed set temperature. This bypasses all the programs and provides a constant temperature permanently until you manually take it out of the HOLD mode again. Thermostat must be in either heat or cool position. SET Slide switch...
READ MORE
9 Jan / 19
No Comments    

How do I switch between Fahrenheit and Celsius?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
To change the Temperature Scale, open the front door on the thermostat. Setup options for how the thermostat will function are performed using a menu on the display screen.   To Access the Setup Menu  : 1. Move the System Mode temp switch to the OFF position, 2. slide switch has...
READ MORE
9 Jan / 19
No Comments    

What is the air filter reminder, why is it flashing?

dcahill    Programmable Thermostat TX1500U TX1500Uc TX500U TX500Uc TX700U TX700Uc TX9100U TX9100Uc
When you see the word “Filter” flashing in the display of the thermostat, it is simply a reminder to change the filter in the blower of your heating\cooling system (totally separate from thermostat).   This feature does not affect the operation of thermostat in any way.   There is a...
READ MORE
9 Jan / 19
No Comments    

How do I switch between 12 hr and 24 hr time on my thermostat?

dcahill    Programmable Thermostat TX1500Uc TX500Uc TX700Uc TX9100Uc
To change the Temperature Scale, open the front door on the thermostat. Setup options for how the thermostat will function are performed using a menu on the display screen. To Access the Setup Menu  :      1. Move the System Mode temp switch to the OFF position,      2....
READ MORE